Strictly for foliar application only: Do NOT inject into hydroponic reservoirs, NFT, DWC or root-drench lines.

CANOPY & CHLOROPHYLL RESCUE MATRIX

NH Bio CalMag Protect +

A premium foliar canopy-rescue concentrate for humid tropical production—designed to mitigate Calcium Tipburn, rebuild chlorophyll in yellowing foliage, and help exhausted fruiting canopies recover after heavy harvests.

LEAFY GREENS · TIPBURN & GREEN-UP

FRUITING CROPS · POST-HARVEST REBOOT

Supports Calcium Tipburn mitigation

Supports recovery from interveinal chlorosis

Helps rebuild exhausted fruiting canopies

Supports natural canopy defenses

Save My Canopy Dosing Calculator

PRE-LAUNCH · PER LITRE

₱1,200 ₱1,500

ILLUSTRATIVE CANOPY RESPONSE

GREEN-UP ACTIVE

CHLOROPHYLL STATUS REBUILDING GREEN-UP

TIPBURN SUPPORT ACTIVE FOLIAR

CA : MG RATIO 2.3 : 1 BALANCED

FE : MN RATIO 3.5 : 1 BALANCED

NH Bio CalMag is available only for trials. Participating in the trials require assembling data, periodic submission, and acceptance of our researchers in your farm premises. To join, fill up form at the bottom of the page.

APPLY HERE

Agricultural backpack and handheld foliar sprayers

Leaves · Canopy · Growing Tissues Direct foliar application

APPLICATION RULE

FOLIAR MEANS FOLIAR.

NH Bio CalMag Protect + is designed for direct canopy application. Spray the foliage and growing tissues—not the nutrient reservoir or root zone.

DO NOT APPLY HERE

Reservoir · Root Zone · Nutrient System Not for root-zone delivery

NFT DWC KRATKY ROOT-DRENCH LINES VOLUMETRIC INJECTION

Apply to the canopy

Spray leaves, growing tissues and the active canopy directly.

Direct foliar application

Keep it out of the root zone

Do not add NH Bio CalMag Protect + to reservoirs, nutrient systems or root-zone delivery lines.

NFT DWC KRATKY ROOT-DRENCH INJECTION

Foliar means foliar.

NH Bio CalMag Protect + is designed for canopy application—not hydroponic nutrient or root-zone delivery.

SPRAY THE CANOPY. KEEP IT OUT OF THE RESERVOIR.

TRIPLE-THREAT BIO-MATRIX

Three Biological Support Pathways

NH Bio CalMag Protect + combines three biological support components with its mineral matrix to help the canopy cope with stress, support natural defenses, and recover after heavy crop demand.

COMPONENT 01

Active Marine Extract Complex

Stress & Growing-Tissue Support

Supports canopy recovery under heat and water-balance stress while helping actively growing tissues maintain physiological activity.

40,000 ppm in concentrate

COMPONENT 02

Marine-Derived Bio-Elicitor

Natural Defense Support

Helps stimulate the plant’s own defense responses, supporting the canopy under humid conditions where leaf-spot pressure can increase.

20,000 ppm in concentrate

COMPONENT 03

Plant-Derived L-Isomers & Peptides

Metabolic Recovery Support

Supports metabolic recovery when the canopy is depleted after rapid growth or heavy fruit production.

20,000 ppm in concentrate

COMPONENT 01

Active Marine Extract Complex

Stress & Growing-Tissue Support

Supports canopy recovery under heat and water-balance stress while helping actively growing tissues maintain physiological activity.

40,000 ppm in concentrate

COMPONENT 02

Marine-Derived Bio-Elicitor

Natural Defense Support

Helps stimulate the plant’s own defense responses, supporting the canopy under humid conditions where leaf-spot pressure can increase.

20,000 ppm in concentrate

COMPONENT 03

Plant-Derived L-Isomers & Peptides

Metabolic Recovery Support

Supports metabolic recovery when the canopy is depleted after rapid growth or heavy fruit production.

20,000 ppm in concentrate

MINERAL ARCHITECTURE

Two Ratios. One Deep Green.

The mineral matrix is built around two key nutrient relationships that support structural tissue, chlorophyll function, and canopy recovery.

Structure + Chlorophyll

2.3 : 1 Ca : Mg

Calcium supports the structure of rapidly expanding tissue, while magnesium sits at the functional center of the chlorophyll molecule.

Chloroplast + Photosynthesis Support

3.5 : 1 Fe : Mn

Iron supports chloroplast development, while manganese participates in key reactions of photosynthesis that help the plant capture and use light energy.

GUARANTEED ANALYSIS

Nitrogen (N) 0.00%

Calcium (Ca) 1.90%

Magnesium (Mg) 0.825%

Iron (Fe) 1,100 ppm

Manganese (Mn) 312 ppm

Active Marine Extract Complex 40,000 ppm

Marine-Derived Bio-Elicitor 20,000 ppm

Plant-Derived L-Isomers & Peptides 20,000 ppm

Structure + Chlorophyll

2.3 : 1 Ca : Mg

Calcium supports the structure of rapidly expanding tissue, while magnesium sits at the functional center of the chlorophyll molecule.

Chloroplast + Photosynthesis Support

3.5 : 1 Fe : Mn

Iron supports chloroplast development, while manganese participates in key reactions of photosynthesis that help the plant capture and use light energy.

GUARANTEED ANALYSIS

Nitrogen (N) 0.00%

Calcium (Ca) 1.90%

Magnesium (Mg) 0.825%

Iron (Fe) 1,100 ppm

Manganese (Mn) 312 ppm

Active Marine Extract Complex 40,000 ppm

Marine-Derived Bio-Elicitor 20,000 ppm

Plant-Derived L-Isomers & Peptides 20,000 ppm

TARGET CROP FAMILIES

Built for High-Demand Canopies

Designed for leafy greens, aromatic herbs, and high-value fruiting crops grown under humid tropical conditions.

LEAFY GREENS

ASTERACEAE & BRASSICACEAE

Romaine
Iceberg
Cabbage
Kale
Bok Choy

NIGHTSHADES

SOLANACEAE

Bell Peppers
Chili Peppers
Tomatoes
Eggplants

GOURDS & MELONS

CUCURBITACEAE

Cucumbers
Cantaloupes
Honeydews
Zucchini
Squash

AROMATIC HERBS

LAMIACEAE

Basil
Mint
Oregano

LEAFY GREENS

ASTERACEAE & BRASSICACEAE

Romaine
Iceberg
Cabbage
Kale
Bok Choy

NIGHTSHADES

SOLANACEAE

Bell Peppers
Chili Peppers
Tomatoes
Eggplants

GOURDS & MELONS

CUCURBITACEAE

Cucumbers
Cantaloupes
Honeydews
Zucchini
Squash

AROMATIC HERBS

LAMIACEAE

Basil
Mint
Oregano

Applied Foliar PPM

What Lands on Your Leaves

The exact parts-per-million delivered at the 3.0 mL per litre heavy-rescue rate — every active accounted for.

Active compound @ 3.0 mL/LApplied PPMAgronomic role

Active Marine Extracts120.0 ppmStress shield + meristem stimulation

Marine Bio-Elicitor60.0 ppmSAR trigger vs. tropical leaf spots

Bio-Active Peptides60.0 ppmMetabolic funding + wound repair

Calcium — fully chelated57.0 ppmCellular brick · Tipburn mitigation

Magnesium — fully chelated24.8 ppmChlorophyll core · canopy reboot

Iron — complexed3.3 ppmChloroplast assembly catalyst

Manganese — complexed0.94 ppmPhotosystem II · lockout prevention

0.00% Nitrogen — salt-free, peptide-origin only · safe to spray straight through peak harvest

Strictly for foliar application only: Do NOT inject into hydroponic reservoirs, NFT, DWC or root-drench lines.

NutriHydro · Precision Grower Dosing Calculator

Calculation Tool

Precision Grower Dosing

Pick your sprayer and application rate — get the exact pour and the resulting PPM in the foliar spray solution.

CalMag Mix Assistant ● Live Calculator

1 Sprayer Type Tap to select

Tank volume (litres)

2 Intent & Dose Rate Tap to select

Add to tank

2.0 mL

For a 1 L hand sprayer · maintenance rate

Applied PPM in foliar spray solution

FIELD EXECUTION & APPLICATION TIMING

Spray When the Leaf Can Use It

Foliar uptake works best when the canopy is physiologically active, stomata are open, and evaporative demand (VPD) is balanced.

Vapor Pressure Deficit (VPD) & Transpiration Gauge

TRANSPIRATION WINDOW

0.95 kPa Stomata Open • Peak Absorption Window

TOO WET

High Humidity / Rain • Stomata Close

LOW UPTAKE

OPTIMAL WINDOW

5:00–7:00 AM or After 5:00 PM

PEAK ABSORPTION

TOO DRY

Midday Sun / Heat • Flash Evaporation

AVOID SPRAYING

APPLICATION TIMING

Best Spray Window

Early Morning 5:00–7:00 AM

Late Afternoon AFTER 5:00 PM

Avoid spraying during peak midday heat.

PATHWAY A

Dark Leafy Greens

Frequency: Apply every 10–14 days for routine canopy care.
Target Zone: Direct nozzle into the inner crown and developing heart leaves.
Goal: Mitigate Calcium Tipburn and promote deep green color.

PATHWAY B

Continuous Fruiting Crops

Post-Harvest: Apply 1 day after a heavy harvest.
Repeat Cycle: Repeat every 4–5 days (maximum 2–3 applications).
Target Zone: Lightly coat the mid-to-upper vegetative canopy.

APPLICATION TIMING

Best Spray Window

Early Morning 5:00–7:00 AM

Late Afternoon AFTER 5:00 PM

Avoid spraying during peak midday heat.

PATHWAY A

Dark Leafy Greens

Frequency: Apply every 10–14 days.
Target Zone: Target inner crown and developing heart leaves.
Goal: Mitigate Calcium Tipburn and promote deep green color.

PATHWAY B

Continuous Fruiting Crops

Post-Harvest: Apply 1 day after heavy harvest.
Repeat Cycle: Repeat every 4–5 days if needed (maximum 2–3 applications).
Target Zone: Target mid-to-upper vegetative canopy.

TANK MIXING & COMPATIBILITY

Mix Clean. Spray Clean.

Follow the recommended tank-mixing order and pH range for consistent foliar preparation and application.

Standard Tank Mixing Sequence

1 Fill spray tank to 50% capacity with clean water.

2 Adjust water pH to pH 5.5–6.0 before adding the product.

3 Add exact dose of NH Bio CalMag Protect + and agitate gently.

4 Fill the remaining water volume and continue gentle agitation.

COMPATIBLE

Bacillus products
Beauveria products
Mild insecticides
Supplemental amino acid powders

DO NOT MIX WITH

Copper Hydroxide
Harsh synthetic fungicides
Heavily alkaline solutions

JAR TEST PROTOCOL

When compatibility is uncertain, perform a small jar test and observe for 15 minutes for heat, cloudiness, or precipitation before committing to a full spray tank.

NH Bio CalMag Protect + Back Product Label Reference

Back-label reference — always follow the product label.

Standard Tank Mixing Sequence

1 Fill spray tank to 50% capacity with clean water.

2 Adjust water pH to pH 5.5–6.0 before adding the product.

3 Add exact dose of NH Bio CalMag Protect + and agitate gently.

4 Fill the remaining water volume and continue gentle agitation.

Back-label reference — always follow the product label.

COMPATIBLE

Bacillus products
Beauveria products
Mild insecticides
Supplemental amino acid powders

DO NOT MIX WITH

Copper Hydroxide
Harsh synthetic fungicides
Heavily alkaline solutions

JAR TEST PROTOCOL

When compatibility is uncertain, perform a small jar test and observe for 15 minutes for heat, cloudiness, or precipitation before committing to a full spray tank.

STORAGE & FREQUENTLY ASKED QUESTIONS

Use It Right. Store It Right.

Follow the recommended storage, handling, and foliar-use guidelines for NH Bio CalMag Protect +.

Storage & Handling

Shake well before use.
Store in a cool, dry, well-ventilated area.
Keep away from direct sunlight.
Reseal tightly after use.
Avoid contaminating the concentrate with dirty water, tools, or spray solution.

CRITICAL USE WARNING

FOLIAR APPLICATION ONLY

Do not add NH Bio CalMag Protect + into:

NFT RESERVOIRS DWC RESERVOIRS KRATKY SYSTEMS NUTRIENT TANKS ROOT-DRENCH LINES VOLUMETRIC INJECTION

Frequently Asked Questions

1. Can I use NH Bio CalMag Protect + in my hydroponic reservoir?

No. This product is strictly for foliar application. Do not add it to NFT, DWC, Kratky, nutrient reservoirs, root-drench systems, or injection lines.

2. How often should I spray leafy greens?

For routine canopy care, apply every 10–14 days and target the inner crown and developing heart leaves.

3. How should I use it on fruiting crops?

Apply 1 day after a heavy harvest. Repeat every 4–5 days if needed, for a maximum of 2–3 applications. Target the mid-to-upper vegetative canopy.

4. What is the recommended application rate?

Maintenance: 2.0 mL/L.
Heavy Rescue: 3.0–4.0 mL/L.

5. Can I tank-mix it with other products?

It is compatible with Bacillus products, Beauveria products, mild insecticides, and supplemental amino acid powders. Avoid Copper Hydroxide, harsh synthetic fungicides, and heavily alkaline solutions. Perform a 15-minute jar test when compatibility is uncertain.

6. When is the best time to spray?

Apply from 5:00–7:00 AM or after 5:00 PM. Avoid peak midday heat.

READY FOR FIELD DEPLOYMENT